B573 Optical Target System
Standard Equipment by HPI, Austria
For research and development, quality control, and acceptance tests, the B573 Optical Target System can be utilised in the calibre range of 4 to 20 mm (40 mm Low Velocity).
It is primarily intended for use at indoor shooting ranges, though it can also be used outside or in covered spaces when the weather is dry.
Two cameras with an integrated lighting unit and a reflecting foil make up the B573 Optical Target System. It enables the determination of shot position.
As well as small- and medium-calibre velocity recording. Two high-speed line-scan cameras are permanently stationed on the lower corner to monitor the effective Target sensor area, which is 1.7 square metres.
Suitable for
- Measurements in sub-/ trans- and supersonic ranges
- Measurements of individual shots and bursts
- Usual Tracer projectile
- Velocity
- Measurements at various distances
- R&D and routine tests
Features
- No controls at the target
- Unaffected by changing ambient light
- Simple connection to PC
- Immediate presentation of results
- Easy static calibration
- High accuracy
| Calibre Range | 2 mm – 40 mm (incl. 40 mm LV) |
|---|---|
| Velocity Range | 20-2000 m/s |
| Rate of fire | Theoretically up to 12,000 rpm. Depending on test range conditions. |
| Accuracy | ± 1 mm |
| Operating temperature | 0 C – 40 C |
| Humidity | 95 % non-condensing |
| Sensor area | 1x1 m |
| Center Sensor Area | 1.0 sqm |
| Eff. Sensor Area approx | 1.7 sqm |
| Dimensions | 2000 x 1180 x 2000 mm (L X W X H) |
| Weight | ~ 50 KG |